increased due to the acceleration of the elevator. Since the period depends inversely on g, and the effective value of g increased, then the period of the pendulum will decrease (i.e., its frequency will increase and it will swing faster).

**Table of Contents**show

## How do physics solve elevator problems?

support force F = mass x acceleration + weight For a mass m= kg, the elevator must support its weight = mg = Newtons to hold it up at rest. If the acceleration is a= m/s² then a net force= Newtons is required to accelerate the mass. This requires a support force of F= Newtons.

## Why do you feel heavier in an elevator going up physics?

If you stand on a scale in an elevator accelerating upward, you feel heavier because the elevator’s floor presses harder on your feet, and the scale will show a higher reading than when the elevator is at rest.

## How do you find the normal force of an object in an elevator?

Consider the normal force acting on you from the elevator: N = mg if the elevator is at rest or moving at constant velocity. N = mg + ma if the elevator has an upward acceleration. N = mg – ma if the elevator has a downward acceleration.

## How do elevators work physics?

## How do you calculate work done by an elevator?

## What will happen to a person’s weight when he is in a moving elevator?

From the above explanation and given condition when person in an elevator is moving at constant speed in such case the net acceleration will be zero. Thus we can say that person’s weight when he is in a moving elevator will not change because the apparent weight of the person will be equal to its true weight.

## Why are you lighter when elevator goes down?

This can also make you feel lighter: when the elevator slows down, you need to slow down with it. But gravity is always pulling you down, so for you to slow down, the floor needs to push up on you less, so gravity can slow you down. Since the floor pushes on you less, you feel lighter.

## Does gravitational mass change in an elevator?

Due to the equality of gravitational and inertial mass, everything in the elevator is falling to the ground with the same constant acceleration g. The floor of the elevator is no longer supporting you against the force of gravity.

## What is time period of a pendulum in a lift?

Time period of simple pendulum. T=2π√lgeff. T=2π√lg When lift stationary. When lift starts moving upwards with an acceleration g3. T=2π√lg+aa=g3T′=2π√lg+g3=2π√3l4gT′=√32T.

## What is the period of this pendulum if the elevator accelerates upward with an acceleration A?

When the elevator accelerates upwards with an acceleration, apparently the period becomes T = 2π √lg+a, which would decrease the period.

## How do you calculate upward force?

To calculate an upward force, multiply the upward acceleration by the object’s mass.

## How much force is needed to lift a 25 kg?

(Note: The weight of a 25-kg object is approximately 250 N; it takes 250 N to lift the object up.)

## What is the formula for normal force?

Normal force (Fn) can be calculated by the application of Newton’s Second Law (F=m*a). On a flat surface, for example, Fn can be calculate by Fn=m*g. On a surface inclined with an angle X, Fn can be calculated by Fn=m*g*cosX.

## What are the common problems in lift?

- Worn-Out Sheaves. The sheave is the pulley connected to the elevator hoist ropes.
- Contaminated Lubrication and Oil.
- Bearing Breakdowns.
- Power and Power Supply Failures.

## What is the acceleration of the elevator?

1.5 m/s2. Ervin Siney Ferry General Physics and its application to industry and everyday life, 1921. “A elevator starts to descend with an acceleration of 3 m per sec in a sec.”

## What is the formula of tension in physics?

Solution: We know that the force of tension is calculated using the formula T = mg + ma.

## How do you calculate the work done on an object when you push it?

It is directly related to both the force applied to the object and the distance the object moves. Work can be calculated with this equation: Work = Force x Distance. The SI unit for work is the Newton meter (N m). One joule equals the amount of work that is done when 1 N of force moves an object over a distance of 1 m.

## How do you calculate work force and distance?

## How much work does an elevator motor do to lift a 1000 kg elevator a height of 200 m?

Thus, the work done is 9.81×105J.

## When lift moves upward actual weight is?

So, when a lift accelerates upwards, the apparent weight of the person inside it increases. So, when a lift accelerates downwards, the apparent weight of the person inside it decreases. R = m (g-g) = 0. Thus, the apparent weight of the man becomes zero.

## What happens to your weight when you are in a lift which goes down?

When the lift goes down the weight of the body decreases because when the lift goes down there is a force called pseudo force which pushes lift upward and results in a decrease in weight.

## How does weight of a person in an elevator vary if it is moving with uniform velocity?

Solution : There is no change in weight as the lift is moving with uniform velocity.

## Why does normal force change in an elevator?

This requires an increased normal force. When the elevator is accelerating downwards, it does not need to oppose gravity as much and so the normal force decreases to provide a net downward force from gravity. No changing mass is needed.

## What two forces act on you while you are in a moving elevator when are these forces of equal magnitude and when are they not?

The two forces acting on a person when he is moving in an elevator is the force of gravity and the normal force by the elevator. The two forces are of equal magnitude, and the elevator is static or moving with constant velocity. Their magnitudes are unequal when the elevator is accelerating upward or downward.