If you stand on a scale in an elevator accelerating upward, you feel heavier because the elevator’s floor presses harder on your feet, and the scale will show a higher reading than when the elevator is at rest.
Table of Contents
How do you solve an elevator problem in physics?
support force F = mass x acceleration + weight For a mass m= kg, the elevator must support its weight = mg = Newtons to hold it up at rest. If the acceleration is a= m/sยฒ then a net force= Newtons is required to accelerate the mass. This requires a support force of F= Newtons.
How do you calculate the weight of an elevator moving?
What force does a scale measure in an elevator?
The scale reads the Normal force, so it reports your weight as greater than it was at rest. The same two forces are at work as when the elevator was accelerating up. The scale will read the Normal force which is less than it was at rest.
How do you calculate work done by an elevator?
How do you calculate elevator capacity?
The recommended goal is for the elevator to be able to move 10-12% of building’s population in five minutes. To calculate the normal load, you will need to allow 2.3 square feet of space per person.
Why do you weigh less in an elevator?
This can also make you feel lighter: when the elevator slows down, you need to slow down with it. But gravity is always pulling you down, so for you to slow down, the floor needs to push up on you less, so gravity can slow you down. Since the floor pushes on you less, you feel lighter.
Why do you feel weightless in an elevator?
What you are feeling is the result of accelerationโspeeding up and slowing downโnot an actual change in weight. But that woozy feeling you get as an elevator starts to descend does give you a brief sense of what it’s like to feel weightless.
How do elevators work physics?
How do you calculate the weight of an object in an elevator?
What is the formula for weight in physics?
The weight of an object is defined as the force of gravity on the object and may be calculated as the mass times the acceleration of gravity, w = mg.
How do you calculate apparent weight in physics?
The apparent weight of an accelerating object is the vector sum of its real weight and the negative of all the forces that produce the object’s acceleration a = dv/dt. wapparent = wreal – ma.
What will happen to a person’s weight when he is in a moving elevator?
From the above explanation and given condition when person in an elevator is moving at constant speed in such case the net acceleration will be zero. Thus we can say that person’s weight when he is in a moving elevator will not change because the apparent weight of the person will be equal to its true weight.
Is the reading on the scale in the elevator higher/lower or the same as the reading in her bathroom?
When the elevator (you) moves up – acceleration increases (adding on to the 9.8ms2 ) and there is more normal force applied to the floor. This results in a larger number on the scale.
How do you find the tension in an elevator cable?
When lift goes upward, then total tension equals to the sum of weight and force due to acceleration. When lift goes downward, then total tension equals the difference of weight and force due to acceleration.
What is the formula for work done in physics?
To express this concept mathematically, the work W is equal to the force f times the distance d, or W = fd. If the force is being exerted at an angle ฮธ to the displacement, the work done is W = fd cos ฮธ.
How do you calculate work force and distance?
How much work does an elevator motor do to lift a 1000 kg elevator a height of 200 m?
Thus, the work done is 9.81ร105J.
How do you calculate the speed of an elevator?
Lift speed is usually expressed in m/sec (metres per second). Platform Lifts under the Machinery Directive are limited to a maximum speed of 0.15m/sec (150mm per second). In order to calculate the time that the lift will take to complete a single journey you will need to divide the total lift travel by the speed.
Is an elevator a dead load?
DEAD LOADS Permanent non-structural elements such as roofing, flooring, pipes, ducts, interior partition walls, Environmental Control Systems machinery, elevator machinery and all other construction systems within a building must also be included in the calculation of the total dead load.
How much weight does an elevator hold?
Generally speaking, a standard elevator in a low-rise building can hold anywhere from 2,100 to 2,500 lbs (907 to 1,134 kg). The larger the building, the more capacity it will normally have.
What happens to the weight of a body in a lift which has a net upward acceleration Class 11?
Answer: If you stand on a scale in an elevator accelerating upward, you feel heavier because the elevator’s floor presses harder on your feet, and the scale will show a higher reading than when the elevator is at rest. On the other hand, when the elevator accelerates downward, you feel lighter.
What is the apparent weight felt by a person in an elevator?
R = m(g – g) = 0. Thus, the apparent weight of the man becomes zero. This is because both the man and the lift are moving downwards with same acceleration ‘g’ and so there are no forces of action and reaction between the person and the lift.
Why is weight 0 during free fall?
This is the case during free fall. Neglecting air resistance, there are no other contact forces on a body during free fall and hence, its weight is zero. Also, in interplanetary space, though gravitational force from planets acts on a body. However, there are no contact forces on it and it feels weightless.
Why do we float in a free falling elevator?
You’re right, gravity is pulling you down. But it’s pulling the floor of the elevator down too. And it pulls the floor of the elevator down with the same acceleration as it pulls you down. So you “float” because everywhere around you has the exact same acceleration of 9.81 m/s/s as you do.